Steve Does Stuff!
Steve Does Stuff!
  • 67
  • 2 778 561
Dashcam Intersection Crash in Rochester, MN 11-18-2023
Dashcam Intersection Crash today in Rochester, MN (11-18-2023)
Car turning left had green arrow. Van traveling in opposite direction failed to stop at red light hitting the car in the rear corner panel (airbags deployed). Prior to the light turning green, traffic from my right had the previous green light. Oncoming traffic had a red for a long time.
Переглядів: 1 100

Відео

Yesoul G1 Elephant Setup and First Impressions
Переглядів 2,9 тис.Рік тому
Thanks you to Yesoul Fitness for sponsoring this video. The Yesoul G1 Elephant looks like an affordable alternative to name brand bikes like Peloton. To check out or purchase this bike, use the link below: bit.ly/3YHTO1H Use my exclusive code to save an additional 10%: Steve Does Stuff! App memberships are priced at $10/month or $60/year. Cancel membership anytime and restart without issues. (F...
Are Alexa Bluetooth Mesh Smart Plugs Easy to Setup?
Переглядів 6 тис.Рік тому
I got a set of 4 smart plugs that work over Bluetooth rather than WiFi. Setup is way easier than any other smart plug I've setup before. No Apps to download or accounts to create, the Alexa app takes care of that. Just plug in and ask Alexa to discover new devices....DONE. Smart Plugs work as a mesh network. If one plug is too far away from an Alexa Device, it will talk to another plug to relay...
My First DashCam Near Miss (Idiot blindly pulls onto 65mph Highway)
Переглядів 8022 роки тому
A locally well known intersection with a long history of dangerous accidents, nearly claimed another victim 🥺 I was traveling at 65mph when a car crossed traffic and behind a large truck to cut in front of me. They didn't pull into the closest lane (as they're suppose to) and cut into the right lane. Luckily I prepare myself the this intersection daily. Hardware used to record this video: 3 Cam...
Siri Controlled Garage Door Opener Using a Raspberry Pi. DIY Project Complete Tutorial
Переглядів 10 тис.3 роки тому
This video will show how you can control your garage door using a Raspberry Pi. Setting up a Flask web server, we can open & close the garage door using a web browser, or using Siri. Siri commands will allow you to check the status of the garage door, as well as Opening/Closing the garage door. This video is an update to a previous video. In that video, the hardware setup was the same, but didn...
How to Share Your Xbox Series X Digital Games with Your Friends.
Переглядів 4,2 тис.3 роки тому
The Xbox Series X|S & Xbox One allow you to assign your Xbox Profile to one system as your "Home" Xbox. Anyone that signs into your Home Xbox can play any of your digital games, use your Xbox Live Gold account, as well as your Xbox Game Pass Subscription, all while using their own Xbox profile. To share your digital games, Live Gold, & Game Pass with a friend, sign into your account into their ...
Xbox Series X, Where's My 4K??
Переглядів 6 тис.3 роки тому
When Setting up my Xbox Series X, my TV refused to display the video at the best 4K video, wouldn't support HDR10, or Dolby Vision. My TV settings were the problem. My TCL 55S515 (RokuTV) has 3 HDMI 2.0 ports, but the TV settings were only displaying the video on the HDMI 1.4 standard. I'll show you to change that setting. Want more info on HDMI standards? Check this article from CNET. www.cnet...
DIY Hyperion Ambient TV Light Project (Raspberry Pi + Arduino) Complete Setup
Переглядів 150 тис.3 роки тому
-Check out my GitHub page for written instructions & wiring diagrams, including code for the Arduino & Raspberry Pi WiFi setup. github.com/shrocky2/Hyperion If you are missing settings like Baudrate or something else I show, Go up the the WRENCH in the upper right corner and select "Settings Level"...Change to Advanced or Expert...They should show more options you may not see. Why I use an Ardu...
Wirelessly Stream GoPro Hero 7/8/9 to OBS Studio, VLC, Computers, etc. (MAC EDITION)
Переглядів 42 тис.3 роки тому
Why use a capture card when you can wirelessly stream your GoPro Hero 7/8 to your Apple / Mac computer using an RTMP server. This FREE program that creates a RTMP service that your GoPro can connect to and stream the live video to you Mac/MacBook. While there is a little delay for the footage to arrive, a lot of possibilities are here. Download the RTMP Server HERE: github.com/sallar/mac-local-...
Stream Multiple GoPro Cameras wirelessly in OBS Studio (MonaServer Settings) DJI Drone too
Переглядів 36 тис.4 роки тому
One of my most asked questions I get is about how to wirelessly stream multiple GoPro Cameras in OBS Studio using MonaServer. By changing setting in the MonaServer.ini file, we can create multiple copies of MonaServer running, each one listening to a different port. If you get an error message saying your rtmp address is incorrect, add “/live” to the end of the address. (Without the quotation m...
Wirelessly Stream your DJI drone to OBS Studio, VLC, Computers, etc.
Переглядів 186 тис.4 роки тому
Did you ever want to live stream your DJI drone flight in OBS Studio? It's easy to do using an RTMP server. MonaServer is a FREE open source program that creates a RTMP service that your DJI drone can connect to and stream the live video. While there is a little delay for the footage to arrive, a lot of possibilities are here. If you get an error message saying your rtmp address is incorrect, a...
Wirelessly Stream GoPro Hero 7/8/9 to OBS Studio, VLC, Computers, etc.
Переглядів 191 тис.4 роки тому
Why use a capture card when you can wirelessly stream your GoPro Hero 7/8 to your computer using an RTMP server. MonaServer is a FREE open source program that creates a RTMP service that your GoPro can connect to and stream the live video. While there is a little delay for the footage to arrive, a lot of possibilities are here. If you get an error message saying your rtmp address is incorrect, ...
Raspberry Pi Controlled Garage Door & Sensor (complete instructions)
Переглядів 28 тис.4 роки тому
Setting up a Flask web server to control your garage door & display the door status & log usage. PLEASE NOTE: At 6:40 in the video, I made an error in the video. The magnetic reed switches need to be connected to the Common Terminal & the NO (Normally Open) Terminal. My diagram mistakenly shows connection to NC Terminal. Products I used in this video: Raspberry Pi Zero W with case on Amazon: am...
Roku TV 4 Secret Features - Save $$, Alexa Control, & Pause Live TV
Переглядів 52 тис.4 роки тому
Roku TV 4 Secret Features - Save $$, Alexa Control, & Pause Live TV
Amazing Travel Adapter & USB Charger (Must Have For International Travel)
Переглядів 5214 роки тому
Amazing Travel Adapter & USB Charger (Must Have For International Travel)
Johnston Canyon in 360 Degrees (Banff National Park)
Переглядів 3074 роки тому
Johnston Canyon in 360 Degrees (Banff National Park)
Motorized Bicycle Chain Tensioner Upgrade
Переглядів 32 тис.4 роки тому
Motorized Bicycle Chain Tensioner Upgrade
MINI Countryman Panoramic Sunroof Roller Shade Blinds Repair
Переглядів 42 тис.4 роки тому
MINI Countryman Panoramic Sunroof Roller Shade Blinds Repair
Alexa Controlled Light Switches from Lumary - Dimmer & 3-way Unboxing & Install
Переглядів 4,4 тис.4 роки тому
Alexa Controlled Light Switches from Lumary - Dimmer & 3-way Unboxing & Install
Pixel RL-18L Ring Light Unboxing & Quick Review
Переглядів 5815 років тому
Pixel RL-18L Ring Light Unboxing & Quick Review
$10 Alexa Controlled Smart Garage Door Opener (No Programming Required)
Переглядів 126 тис.5 років тому
$10 Alexa Controlled Smart Garage Door Opener (No Programming Required)
Saguaro National Park - Douglas Spring Trail hike to Bridal Wreath Falls
Переглядів 6685 років тому
Saguaro National Park - Douglas Spring Trail hike to Bridal Wreath Falls
Motorized Bicycle Broken Wheel Respoking - Why & How My Wheel Broke + Repair 4K
Переглядів 6 тис.5 років тому
Motorized Bicycle Broken Wheel Respoking - Why & How My Wheel Broke Repair 4K
GEEKOTO LED Light Ring - LR-18 Unboxing, Setup, & Review
Переглядів 4,3 тис.5 років тому
GEEKOTO LED Light Ring - LR-18 Unboxing, Setup, & Review
eLink Smart Home Kit - Unboxing, Setup, & Quick Review
Переглядів 1,3 тис.5 років тому
eLink Smart Home Kit - Unboxing, Setup, & Quick Review
DJI Spark Test Flight, Quick Edit
Переглядів 1945 років тому
DJI Spark Test Flight, Quick Edit
Coolest Motorized Bike Kickstand Ever (Don't Watch this Video if You Ain't Cool)
Переглядів 15 тис.6 років тому
Coolest Motorized Bike Kickstand Ever (Don't Watch this Video if You Ain't Cool)
Motorized Bicycle - UPGRADE - Dual Brake Cable Lever Install
Переглядів 24 тис.6 років тому
Motorized Bicycle - UPGRADE - Dual Brake Cable Lever Install
WiFi Controlled LED Light Strip - Alexa, Google Home, IFTTT - Unboxing & Setup
Переглядів 17 тис.6 років тому
WiFi Controlled LED Light Strip - Alexa, Google Home, IFTTT - Unboxing & Setup
Setting up a Web Server to Control Your TiVo using Alexa & IfTTT.com
Переглядів 1,3 тис.6 років тому
Setting up a Web Server to Control Your TiVo using Alexa & IfTTT.com

КОМЕНТАРІ

  • @Alexandremix
    @Alexandremix День тому

    I have 3 second delay using a go pro custom rtmp to mona server. Is there any chance to reduce this delay? If i use ipwebcam on android i have like 300ms delay. how come the go pro locally have 3 seconds delay. isnt there any better options?

  • @EziosBladez
    @EziosBladez 12 днів тому

    I used this on my stream today, and OBS kept closing it randomly, I have no idea why, any ideas? Do I have to have Loop Playlist selected?

  • @mmmlive000
    @mmmlive000 14 днів тому

    in case of dji air3 use '/live' at end of rtmp url

  • @TheJohnnyViewer
    @TheJohnnyViewer 15 днів тому

    works with 12 thanks

  • @jerrywaters4814
    @jerrywaters4814 17 днів тому

    Are you going to update tires???

  • @SharrenDabs
    @SharrenDabs 20 днів тому

    had to extract the whole folder to desktop for it to work otherwise it throws /live errors

  • @Ojs_Visualz
    @Ojs_Visualz 23 дні тому

    Mine says invalid rtmp url format.. please how do I resolve it

  • @UprightPhotography
    @UprightPhotography 29 днів тому

    Its say invalid im from Philippines

  • @worscohli
    @worscohli 29 днів тому

    5:00 nvm i spoke too soon.....god why do people make tutorials and then SKIP over the process????? Dude u explaining how u put the chain on doesnt do me any favors. i need to friggin SEE you do it. gaht this is so irritating!

  • @worscohli
    @worscohli 29 днів тому

    Also its crazy to hear u got ur bike for 120...mine was 120 and its a pos. a bike like urs brand new in walmart is like 300-400 nowadays. its ridiculous!

  • @worscohli
    @worscohli 29 днів тому

    THANK YOU!!! This is what im talking about! A detail edsummary of EACH AND EVERY piece, and what they do! Not just someone saying, "Okay imma install in exhaust and i'll see you in a bit!" And completely ignore the process of Assembling the damn exhaust! lmao Like, ppl need to make tutorials as if they are Teaching 10 year olds. Not a seasoned mechanic. I hate it cuz its like, if ur gonna waste ur time doing a tutorial, might as well do it friggin right. So again, i thank you!

  • @gabrielroyer4426
    @gabrielroyer4426 29 днів тому

    How to use this for multiple Gopro without using multiple phones ?

  • @mcmail99
    @mcmail99 Місяць тому

    how could be any clearer than thus! great vid turorial thank you so much!

  • @TylerBigHead
    @TylerBigHead Місяць тому

    when I hit go live the gopro freaks out and says server not active, any way around this

    • @TylerBigHead
      @TylerBigHead Місяць тому

      yeah, so I setup an rtmp server, I cannot get my gopro to connect to it, anyone have any help here ?

    • @e.travelman
      @e.travelman 29 днів тому

      @@TylerBigHead same

  • @notvixios
    @notvixios Місяць тому

    Anyone know whats the range on this?

  • @iTregas
    @iTregas Місяць тому

    Yeah, and its working only in local network(

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      You would have to open up port forwarding on your router in order to stream from over the internet to the computer in your home.

    • @JimmyJokerOfficial
      @JimmyJokerOfficial 11 днів тому

      @@Steve_Does_Stuff there is any guide about that?

  • @one2nv888
    @one2nv888 Місяць тому

    To relieve the stress on the bolts coming out of the gas tank take two extra nuts run one all the way to the gas tank

  • @samwilliamson_74
    @samwilliamson_74 Місяць тому

    Thanks steve, really easy to follow on how to set this up. Tried it with my go pro hero 7 black; which is like 1 model off the range of where they started supporting webcam feature on gopro (go figure!!) nice clear image, but wayy to much delay time given the transfer from device to phone to pc.. would be nice if that were something that could be dealt with? would be a perfect solution for what i'm after if not for that lag

  • @paulallegretti7928
    @paulallegretti7928 Місяць тому

    Great video. Is that 1/8 inch rope and 3/16 inch ferrule set ? Did you use 1/8 inch aircraft cable and did you cut it yourself or buy it by the foot ?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      Yes, the 1/8” wire comes with a plastic coating, so the 3/8” ferret set is needed accommodate that coating. I bought for wire at Home Depot, where they sell it by the foot.

  • @EziosBladez
    @EziosBladez Місяць тому

    Which go-pro app are you using on your phone? And can we get a walk through of the latest version of this app to see that this feature still even exists and this video is fairly old now.

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      The GoPro Quik app is used to control the GoPro. The app will work the same even if it’s updated. The feature might be in a different menu if anything is different.

    • @EziosBladez
      @EziosBladez Місяць тому

      @@Steve_Does_Stuff Awesome thanks for the response.

  • @EziosBladez
    @EziosBladez Місяць тому

    Would this work with GoPro 10?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      10 Black edition should work, I don’t think the Silver editions have this feature

  • @stewart67216
    @stewart67216 Місяць тому

    What about us Mac users? I run OBS on my macbpook pro.

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      I have a dedicated Mac video that uses a different program since MonaServer is PC only. Wirelessly Stream GoPro Hero 7/8/9 to OBS Studio, VLC, Computers, etc. (MAC EDITION) ua-cam.com/video/FnBZieDsLUc/v-deo.html

  • @propm
    @propm Місяць тому

    If I remember correctly, there is a way to delay audio so you can sync it up with the video in OBS, so if you need the audio to be synced that should also be possible with a bit of trickery

  • @solavilavazquez
    @solavilavazquez Місяць тому

    Thanks!!! from Argentina, 4 yeas later!

  • @supriosamanta2563
    @supriosamanta2563 Місяць тому

    Newer versions of OBS do not have the "VLC Video Source" option, instead, use the "Media Source" option and put in your rtmp URL.

  • @Vutsman1
    @Vutsman1 Місяць тому

    Does it work through cellular signal? Not just your WIFI home. Coming home and hitting the button on the phone in cellular mode, would it work.

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      Yes. The app works over the internet. You could open your door from the other side of the world

    • @Vutsman1
      @Vutsman1 Місяць тому

      @@Steve_Does_Stuff But does it work with a cell phone under cellular connection? Driving up to my garage coming down the street?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      Yes, works over cellular

    • @Vutsman1
      @Vutsman1 Місяць тому

      @@Steve_Does_Stuff Cool thx for responding.

    • @Vutsman1
      @Vutsman1 Місяць тому

      I can't pair. Not sure what I'm doing wrong. The app is a bit different then yours.

  • @leiann4688
    @leiann4688 Місяць тому

    It always disconnects after 6 seconds with error message "Make sure URL is correct and your streaming platform is not down" anyone knows how to fix this?

  • @grnwd7
    @grnwd7 Місяць тому

    i cant get flask intalled at all

  • @ReMarkAbleMagic
    @ReMarkAbleMagic Місяць тому

    I suggest people avoid the pre painted engines. They don't do a great job painting them and the don't keep as cool as an unpainted engine. They're great fun so good luck with yours. All the problems I have had with mine have been minor and easily fixed.

  • @manojkiyaari6184
    @manojkiyaari6184 Місяць тому

    Super

  • @lazinggu2051
    @lazinggu2051 Місяць тому

    If you want to copy a Blu-ray and don't want to be held back by copy protections, time restrictions and output formats limitations, DumboFab Blu-ray Ripper will be your best choice. It supports all Blu-ray encryptions, covering AACS, BD+, BD-J, Region Code, Cinavia, and other special encryption schemes. And it's contantly updated to support the newly-released Blu-rays.

  • @macawboy6522
    @macawboy6522 Місяць тому

    33:05 so what is the alternative way to capture the smart tv?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      There is no way to capture a smart tv’s video signal. This setup needs an HDMI device to read that signal. You could try letting up a camera pointed at the tv screen, but it won’t give you the best results. Govee has a product that does this. amzn.to/4aQNueD

    • @macawboy6522
      @macawboy6522 Місяць тому

      @@Steve_Does_Stuff what about using HDMI splitter, input goes to laptop then output 1 goes to tv to display the film and output 2 goes to raspi to process the led? edited: raspi is using video capture card

    • @Steve_Does_Stuff
      @Steve_Does_Stuff Місяць тому

      Yes. They make capture cards that have an HDMI output to send the video to the TV, as well as send the signal to the Pi. amzn.to/3UjIRTh

  • @ronduck2812
    @ronduck2812 2 місяці тому

    Good video I just got one saved lots figure is it 20 to 1.st. or. Is. It. 16 to 1 break in then 20 to 1 I want make sure I get it correct

  • @Azmzogza
    @Azmzogza 2 місяці тому

    is this method must have an internet connection ? Or we can just using the local connection in router without internet ?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      Local network works fine, no internet required

  • @user-gb6gy4xb1k
    @user-gb6gy4xb1k 2 місяці тому

    is this method must have an internet connection ? Or we can just using the local connection in router without internet ?

  • @briannilsenhb
    @briannilsenhb 2 місяці тому

    Epic video Steve

  • @keithfreeman5204
    @keithfreeman5204 2 місяці тому

    This is my 6th year/Summer working on , building, and riding Motorized Bikes. I add a Tuned Pipe, Hi Compression Head, Main Carb Jet is also changed. They come with a #70 jet, I'm running a #67 jet for a bit better Hi End. These small 2 cycle engines, HAVE TO BE WARMED UP !

  • @FEEvents
    @FEEvents 2 місяці тому

    Dosn´t work for my Mini 4 pro with the RC2 Controller. Twitch works fine but with mona it says "Invalid RTMP-Stream URL" Anybody have a solution? GoPro -> MonaServer works also

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      Try adding “/live” to the end of the rtmp address (without the quotation marks)

  • @dugsbugs1
    @dugsbugs1 2 місяці тому

    Hi Steve. This has been working well for me with my workflow but only on my local network. I am trying to configure port forwarding so I can connect remotely. I have set my router and firewall to 1935 but it will not connect to monaserver. Can you give me any advice on what numbers I am missing. I have watched countless videos but can't get my head around it. Cheers. Doug.

  • @rokagrooveradio8429
    @rokagrooveradio8429 2 місяці тому

    Thanks for this, just 1 question i want to use this for in obs djing a hour set, how do you disable the audio coming from vlc, as im wanting to use my mixer for the audio set in obs, do i disable audio in the gopro? thanks again, Paul

  • @art1moose
    @art1moose 2 місяці тому

    14 Years later and still helpful, I love the internet.

  • @royquesada5295
    @royquesada5295 2 місяці тому

    Front brake indicator??

  • @bernarddumortier8266
    @bernarddumortier8266 2 місяці тому

    My roller shade blind was blocked since 18 months. BMW Mini proposed to repair it for 1.208,52 € (...only !!!). This is actually the amount your video made me save because it didn't cost me one cent to repair it. I didn't know it was that simple. Thanks a million.

  • @who_is_marcus3517
    @who_is_marcus3517 2 місяці тому

    Pro tip: if you don't have VLC and want to use it in OBS you can add a Browser Source and add the same rtmp address. Depending on how powerful your computer is, it may help lower resource utilization by not needing to run VLC and OBS at the same time. You can just skip the hand off and go straight into OBS with the browser source. My only issue is trying to figure out the best way to either reduce latency or add an audio render delay so the audio and video match when my band does live streams at shows so I don't have to bring my good camera and worry about someone knocking it over or how long of an HDMI cable I'll need for a certain venue.

  • @superiorstreaming7350
    @superiorstreaming7350 2 місяці тому

    Hi Steve. I know this is a few years old now. I am wondering why you are bringing VLC into the mix. I am connecting my gopro 8 to monaserver and into OBS without having anything to do with VLC. Do you have any advice on being able to connect the camera from a remote location using a different network to the one monaserver is running on. I need to be able to move outside the network area with a 2nd modem and still connect to monaserver but having trouble finding an answer. Cheers. Doug

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      OBS has been updated over the years, and VLC is no longer needed like it once was. Selecting Media Source will allow you to type the rtmp address there. To access your OBS computer across the internet, you would need to open ports within your router to allow internet traffic to access your computer. Your router acts like a firewall to protect your home network. You would need to pass port 1935 to your OBS computer. It would be best to assign your OBS computer a static ip address so port forwarding works without issues.

    • @superiorstreaming7350
      @superiorstreaming7350 2 місяці тому

      @@Steve_Does_Stuff Cheers. Thanks for the quick reply. Time zones must be just right. I am looking at port forwarding at the moment but not sure if I have enough knowledge to attempt it. I will do some more research. Thanks

    • @superiorstreaming7350
      @superiorstreaming7350 2 місяці тому

      @@Steve_Does_Stuff Would it be possible to give me a basic rundown of the procedure. I have one hotspot for my OBS and Monaserver computer at one location and a second hotspot for the gopro at another location. I know how to access both modems in the admin settings but not sure what to change. Do I need to have both hotspots on the same IP address with 1935 on both and match the gopro rtmp settings to that? Thanks. Doug

  • @blorourke
    @blorourke 2 місяці тому

    I need help with a similar issue but I don’t use obs and was wondering if you could help me do the same thing with another program. I’m totally new and don’t know the correct terminology to use so my wording might be wrong. I use livestream studios and want to add multiple GoPros but I can’t figure it out. If you can spend the time to help me I’d appreciate that so much.

  • @anupjoshi3423
    @anupjoshi3423 2 місяці тому

    Can I use it without the phone? Directly from Gopro

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      There is no way to enter the rtmp information into the GoPro with a phone

  • @kqharvey
    @kqharvey 2 місяці тому

    Do you know how to stream the DJI Osmo Pocket 3 wirelessly to OBS on a PC?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      If there is an rtmp option in the app, then it will work. I don’t have an Osmo to test

  • @user-sj3ty9wu5i
    @user-sj3ty9wu5i 2 місяці тому

    Hi steve thanks for your very informative video but i ha e a question i dont see a 5 volts one on Amazon i only see a 250 v how will that be connected would it be the same as the 5 v?

    • @Steve_Does_Stuff
      @Steve_Does_Stuff 2 місяці тому

      Check out this one: www.amazon.com/dp/B0752P57ZG/ref=cm_sw_r_as_gl_api_gl_i_TQPTC23DTM15JB5B13BE?linkCode=ml2&tag=stevedoesstuf-20

  • @debora-bora7748
    @debora-bora7748 3 місяці тому

    Possible with dji osmo ? 😭